UK CVF Royal Navy aircraft carriers, HMS Queen Elizabeth and HMS Prince of Wales, are the largest warships ever constructed in the country.
CVF displaces 65,000t, a size between the US 100,000t Nimitz Class and the French 43,000t Charles de Gaulle Class aircraft carriers, and three times larger than the 20,000t UK Invincible Class carriers.
The carrier has a maximum speed of 25k. At 15k, the range is 10,000nm and the ship carries food and fuel for an endurance of seven days between replenishments. Each ship can accommodate a minimum crew of up to 700, extending to 1,600 with aircraft onboard.
The CVF Integrated Project Team managed the procurement programme on behalf of the Ministry of Defence Procurement Executive. The construction of the carriers began with the first steel cut in Govan at the BVT shipyard in July 2009.
HMS Queen Elizabeth was officially christened by The Queen in July 2014 and entered service in December 2017.
The HMS Prince of Wales sailed into its homeport of Portsmouth Naval Base for the first time in November 2019. The ship was commissioned in December 2019. The two aircraft carriers are expected to be fully operational by the end of 2020.
Six British shipbuilding yards played a significant role in the ships’ design and construction, and over 10,000 people were involved in the programme to deliver the aircraft carriers.
Queen Elizabeth Class contractors and Future Carrier Alliance details
In January 2003 the Ministry of Defence (MOD) announced that the preferred prime contractor for the UK future aircraft carrier is BAE Systems with Thales UK as the key supplier. The industrial partnership between BAE Systems and Thales UK is known as the Aircraft Carrier Alliance.
Babcock and VT Group joined the alliance in 2005. VT Group later sold its shipbuilding operation to BAE Systems, while the remaining support and training unit was acquired by Babcock.
In February 2005, Kellogg, Brown & Root UK (KBR) was appointed as preferred ‘physical integrator’ for the project and was responsible for developing the optimum manufacturing strategy. The company was not a part of the alliance for the manufacturing phase.
In April 2006, contracts were placed with alliance members KBR, BAE Systems Naval Ships, Thales UK, VT Group, Babcock and BAE Systems Insyte for the demonstration phase design contracts.
In July 2007, the UK MOD announced main gate approval for the construction of the carriers. At the same time, BAE Systems and VT Group announced the planned creation of a joint venture for the design, manufacture and support of UK surface warships. The joint venture company, called BVT Surface Fleet, began operations on 1 July 2008. It was followed on 3 July 2008 by the UK MOD signing the contracts for the two carriers with BVT and other members of the alliance.
In March 2008, Brand-Rex Limited of Scotland was contracted to provide blown-fibre-optic cable plant (BFOCP) technology. Installation and project management services for the £3m-plus contract were provided by Alfred-McAlpine – IT Services. Fluid Transfer International won a £4m contract to install aviation fuel systems equipment. Salt Separation Services was chosen to provide reverse osmosis equipment as part of a contract worth more than £1m. The equipment will provide 500t of fresh water daily for the personnel onboard. In February 2008, Babcock was awarded a £35m contract for the dockyard modifications required. It purchased the largest crane in the UK, called the Goliath in 2011.
Major contractors include BAE Systems – prime contractor; Thales Naval Ltd – key supplier; BAE Systems Insyte (formerly Alenia Marconi Systems) – C4IS; BMT Defence Systems – naval architecture; EDS – systems integration, fleet support, through life support; Lockheed Martin – programme management and engineering; QinetiQ – computer modelling and simulation, technology, test and evaluation; Rolls-Royce – propulsion, life support; Strachan & Henshaw – waste management, munitions handling; Swan Hunter – construction; VT Group – naval architecture, construction, through-life support.
CVF hull configured for STOVL operations
The Maritime Group at QinetiQ developed a suite of advanced modelling and simulation programmes that were used by the QinetiQ and DPA teams with BAE Systems and the major contractors to characterise the hull, flight deck, hangar deck, internal carrier design and other features.
The hull designs are planned for 50-year service life and are configured with a ski ramp for short take-off and vertical landing (STOVL) operations. The carrier’s service life is substantially longer than the 20-year service life of the selected F-35 STOVL carrier aircraft. The hull is nine-decks-deep plus the flight deck. Tata Steel supplied 40,000t of steel, making up for over 90% of the steel used in the build.
Supporting joint combat aircraft operations
The carrier will support joint combat aircraft, carrying out up to 420 sorties over five days and will be able to conduct day and night time operations. The maximum sortie rate is 110 joint combat aircraft sorties in 24 hours.
The standard air group of 40 aircraft includes 36 Lockheed Martin F-35B joint strike fighter, and four EH101 Merlin helicopter. It can also include other maritime surveillance and control aircraft (MASC).
The maximum launch rate is 24 aircraft in 15 minutes and the maximum recovery rate is 24 aircraft in 24 minutes.
The MASC assessment phase for an airborne early warning aircraft to succeed the Sea King ASaC mk7 helicopter was launched in September 2005. In May 2006, three study contracts were awarded for MASC platform and mission systems options. The contracts were awarded to Lockheed Martin UK to study the potential of using the Merlin with AEW mission systems, AgustaWestland to study maintaining the Sea King ASaC mk7 to 2017 and Thales UK to study upgrading the Sea King’s mission systems.
In July 2006, two further study contracts for the enhanced manned rotary-wing solution were awarded to EADS Defence & Security Systems UK and Northrop Grumman Integrated Systems.
The aircraft carrier’s hangar deck, 155m x 33.5m x 6.7m to 10m high, can accommodate up to 20 fixed and rotary-wing aircraft.
According to the contracts placed in September 2008, Babcock supplied the highly mechanised weapons handling system (HMWHS) and BAE Systems Insyte air traffic control system for the two vessels.
Advantages of the two-island configuration on the Royal Navy carriers
Instead of a traditional single island, a current ship design has two smaller islands. The forward island is for ship control functions and the aft (FLYCO) island is for flying control.
Advantages of the two-island configuration are increased flight deck area, reduced air turbulence over the flight deck and increased flexibility of space allocation in the lower decks. The flight control centre in the aft island is in the optimum position for control of the critical aircraft approach and deck landings.
The radar fit includes the Insyte Artisan 3D Radar. The ship’s main radar was added on top of her forward island in 2013.
Aircraft carrier deck, supporting simultaneous launch and recovery operations
The deck can support simultaneous launch and recovery operations. The deck is fitted with a 13° bow deck ski jump.
No catapult or arresters were fitted in the initial build but the carrier is built to accommodate a future back-fit. The carrier is fitted with a steam catapult or electromagnetic launch system and arrester gear if the option to convert the carrier to the conventional take-off and landing (CTOL) variant proceeds.
The deck has three runways: two shorter runways of approximately 160m for the STOVL joint strike fighter and a long runway, approximately 260m over the full length of the carrier, for launching heavily loaded aircraft – an area of nearly 13,000m². The deck has one or two vertical landing pads for the F-35 aircraft towards the stern of the ship.
Jet blast deflectors are fitted on each runway 160m back from the bow ski jump and probably in line with the rear wall of the first island. The deflectors protect the deck from the blast of the F-35 joint strike fighter aircraft engines, operating at maximum thrust for take-off.
There are two large 70t-load deck-edge aircraft lifts, built by McTaggart Scott of Loanhead, Scotland, to transfer aircraft between the hangar and flight decks, one between the islands and one to the aft of the FLYCO island.
QinetiQ and the US Navy carried out a study on an electromagnetic catapult launcher. Early studies indicated that a 300ft-long, 90MW linear motor would be needed for the CVF aircraft carriers, but both the MOD and UK industry would wish to see the results of demonstrations and trials of electromagnetic launcher technology before considering the selection of a launch system.
A number of hull armour features such as the armoured bulkheads and the side armour plates were dropped from the original project design due to budget constraints. The ship’s present hull design enables a future upgrade to accommodate a catapult launch system.
Systems on Queen Elizabeth Class, including medium-range radar (MRR)
The carrier is installed with the Phalanx CIWS close-in weapons system, a rapid-fire, computer-controlled, radar-guided gun to defeat anti-ship missiles and other close-in threats.
Selex Communications was awarded the production contract for the vessels’ identification friend or foe (IFF) systems in October 2007.
The Queen Elizabeth Class is fitted with the Royal Navy’s new-generation maritime medium-range radar (MRR) to replace the type 996 surveillance and target indication radar. In August 2008, BAE Systems Insyte (with Qinetiq) ARTISAN 3D E/F-band radar was selected for the MRR.
Carrier propulsion system based on Rolls-Royce’s IEP technology
The MOD decided not to use nuclear propulsion because of its high cost and chose a podded propulsion system based on Rolls-Royce’s integrated electric propulsion (IEP) system. The contract for the propulsion system was awarded in October 2008.
The propulsion system consists of two Rolls-Royce Marine 36MW MT30 gas turbine alternators, providing over 70MW, and four diesel engines, providing approximately 40MW, with the total installed power approaching 110MW.
The gas turbines and diesel engines are the largest supplied to the Royal Navy, their combined power feeds the low-voltage system and supplies two tandem electric propulsion motors that drive a conventional twin-shaft arrangement, fitted with fixed-pitch propellers.
In December 2007, the UK MOD placed a contract with Wartsila Defence for two 12-cylinder and two 16-cylinder Wartsila 38 diesel engines for the IEP of each ship.
L-3 Communications supplied the integrated platform management system, Converteam high-voltage system and propulsion converters / motors.
CVF has two bronze propellers, each 6.7m in diameter and weighing 33t. The anchors are 3.1m in height and weigh 13t.
CVF will carry over 8,600t of fuel to support both the vessel and aircraft.
|Displacement||65,000 tonnes (64,000 long tons; 72,000 short tons)|
|Length||280 m (920 ft)|
|Beam||– 39 m (128 ft) waterline
– 73 m (240 ft) overall
|Draught||11 m (36 ft)|
|Decks||16,000 m2 (170,000 sq ft) 9 decks beneath flightdeck with hangar covering the centrepiece of two decks (without islands)|
|Installed power||– 2 × Rolls-Royce Marine Trent MT30 36 MW (48,000 hp) gas turbine engine
– 4 × Wärtsilä 38 marine diesel engines (4 × 16V38 11.6 MW or 15,600 hp)
|Propulsion||– Integrated electric propulsion
– 4 × GE Power Conversion 20 MW (27,000 hp) Advanced Induction Motors and VDM25000 drives
– 2 × shafts; fixed pitch propellers
|Speed||In excess of 25 knots (46 km/h; 29 mph), tested to 32 knots (59 km/h; 37 mph)|
|Range||10,000 nautical miles (19,000 km; 12,000 mi)|
|Troops||250 to 900|
|Complement||679 crew, not including air element; total berths for up to 1,600|
|– S1850M long-range radar
– Type 997 Artisan 3D medium range radar
– Ultra Electronics Series 2500 Electro Optical System (EOS)
– Glide path camera (GPC)
|Armament||– 3 × Phalanx CIWS
– 4 × 30-mm DS30M Mk2 guns (for but not with)
– 6 × Miniguns
|Aircraft carried||1 × carrier air wing of 40 aircraft; typically,
– F-35B Lightning (maximum of 36)
– CH-47 Chinook
– AH-64 Apache
– AW101 Merlin HM2, HC4 and Crowsnest AEW
– AW159 Wildcat AH1 and HMA2
|Aviation facilities||– Large flight deck with ski jump
– Hangar deck
– Two aircraft lifts